Factory reset your Yealink T46S

Hold the "OK" button down for 10 seconds or until prompted to initiate factory reset

Yealink T46S No Longer Boots Correctly (Frozen Initializing Screen or Blank Home Screen)

This can occur when the firmware has become corrupted or the phone is otherwise misconfigured.  In any case where all options have been exhausted, it may be necessary to perform a complete refresh of ...

Yealink W60P Quickstart

Yealink W56P & W56H Quick Start Guide

Yealink T46S Not provisioning.

Older t46s models will need a firmware update prior to being provisioned. Older firmwares do not play nice with the provisioning servers certificates. Update to version 66.86.0.15 or newer.

Working with transfers Yealink T46S/U

Answer call Press the transfer key Dial the extension you wish to transfer to You can either Blind Tansfer (B.Tansfer) or Send "Send" connects you to the user to discuss/screen the call and determin...

Enable DND Emergency on Yealink T46S

Navigate tot he phones IP address and enter your login details factory default is admin/admin

Long DSS Key Override Display

To enable longer button displays on Yealink T46S phones, add the override based on length required: features.config_dsskey_length ="1" for half display width features.config_dsskey_length ="2" for qu...

Reset Yaelink phone to factory default bypassing password lock

To factory default a yaelink phone, the usual method is to press and hold the OK button in the center of the arrow keys until the message "Reset to factory setting?" appears, where you would then pres...

Enable Web Management of Yaelink Phones

To enable the web UI on a Yaelink phone, add the following to the overides: wui.http_enable ="1"wui.https_enable ="1"

Line appearances

All line appearances need to be on the first page of the phone to make them work.

Disable Call Waiting Tone Yealink T4X series

On your device press the "Menu" softkey.